POWER. SET UP. CAPACITY. OPERATION. MAINTENANCE.

Easy-to-use, reliable, productive equipment is important to you. Here are 5 reasons to choose LINKIT Portable Conveyors:

1.POWER.


Each LINKIT Conveyor runs on 110v power and it is recommended to use one dedicated 15 or 20-amp breaker for every four units linked together.

2. SET UP


In a matter of minutes, wheel the LINKIT Conveyor(s) into position, connect them together, “plug-and-play.”

3. CAPACITY


Four LINKIT Conveyors can be linked and powered by the same feed to help you move up to and over 60 tons of material per hour with a payload up to 440 lbs!

4. OPERATION


Tight workspace? LINKIT Conveyors can be positioned up to 35° and the run requires only 11″ in height and 24″ or 30″ in width.

5. MAINTENANCE


LINKIT Portable Conveyors stack for easy storage and transportation. Since controls and motor are sealed and waterproof, they can be power washed between uses. When needed, belts are replaceable in a few easy steps.

POWER. SET UP. CAPACITY. OPERATION. MAINTENANCE.