BELT SCRAPERS

PAC-WEAR MULTI-DURO SCRAPERS

Our Bi-DURO and TRI-DURO belt scrapers are made from high quality, natural, and synthetic rubber vulcanized together to form a tight seal when used in wet and sticky scraper/squeegee applications. This material can also be used in lining, impact chute, vibration dampening, and many more applications.

BLACK-ORANGE BI DUROMETER RUBBER SKIRTING/BELT WIPER-SCRAPER

High Quality 1635 PSI black 60A bonded to 2100 PSI orange 45A rubber. Available in 1/2”, 3/4”, and 1” gauge. (Custom cut widths/pcs, and bulk rolls up to 60” x 50’ are available.)

BLACK-ORANGE-BLACK HEAVY DUTY TRI-DUROMETER RUBBER BELT WIPER-SCRAPER

High quality 2100 PSI orange and 45A rubber sandwiched between 2 layers of 170 PSI black 60A rubber. Available in 3/4” and 1” gauge x 6” and 8” pre-slit widths. (Custom cut widths/pcs, and bulk rolls up to 60” x 50’ are available.)

BLACK GREY-BLACK EXTREME DUTY TRI-DUROMETER RUBBER BELT WIPER-SCRAPER

High quality 2100 PSI grey 60A rubber sandwiched between 2 layers of 1700 PSI black 85A rubber. Available in 1” gauge x 6” and 8” pre-slit widths. (Custom cut widths/pcs, and bulk rolls up to 60” x 50’ are available.)

INFINITY BELT SCRAPERS

With the Infinity Finger Scraper, cleated, non-cleated, and texture/profiled conveyor belts are cleaned more effectively. Scrapers are designed to replace conventional bristle brush cleaners that are prone to material build up throughout the bristle.

Single or dual rows of high durometer, urethane fingers effectively clean the surface of the cleated/ textured belt with their patented “flicking” motion – without the use of brush bristles that break off and eventually cause clogs, losing their effectiveness. The Infinity Finger Scraper installs easily, and is designed for high performance in any weather conditions.

Related Products