SMOOTH TOP BELTING
We have a vast selection of heavy-duty belting products with a broad range of tension ratings and cover compounds to handle a wide variety of products.
2-PLY 150# 1/32 x 1/32 BARE GRADE 2
Standard grade rubber covers resist abrasion and weathering in non-oily applications. Used as an economical, general purpose belt and is popular in many agricultural applications, including potato conveying and transport on slider beds.
2-PLY 150# 1/32 x 1/32 GRADE 2
Standard grade rubber covers for light-duty unit and bulk handling applications. Popular fabricated belting for transporting potatoes, wood products, and light bulk materials
2-PLY 150# 1/8 x 1/32 GRADE 2
Popular and versatile choice for small capacity conveyors. Durable covers and flexible carcass allow belt to wrap small pulley diameters.
2-PLY 220# 1/8 x BARE GRADE 2
Excellent medium-duty conveyor belt with moderately thick abrasion resistant top cover. Popular for pan/metal bed conveyors, particularly recycling and wood waste.
2-PLY 220# 1/8 x 1/16 GRADE 2
Popular and versatile belt for medium-duty applications. Grade 2 covers provide excellent abrasion resistance and durability.
2-PLY 220# 3/16 x 1/16 GRADE 2
One of the most popular belts in today’s marketplace. Widely used to handle aggregate and other abrasive materials. 3/16″ top cover offers durability and long belt life.
3-PLY 330# 3/16 x 1/16 GRADE 2
Very popular belt used extensively to transport rock, sand, and gravel. Offers tough polyester/nylon carcass and abrasion resistant Grade 2 covers for needed durability.
3-PLY 330# 1/4 x 1/16 GRADE 2
Popular heavy-duty belt where additional top cover protection is needed for better abrasion and gouge resistance. Widely used in aggregate and mining applications.
4-PLY 440# 1/4 x 1/16 GRADE 2
Excellent heavy-duty belt when higher tensions are required and to support wide loads. Thick top cover withstands impact, cutting, and gouging.
2-PLY 400# 5/16 x 1/16 GRADE 2
A popular heavy-duty belt, particularly in confined spaces with limited clearances. This belt is an excellent replacement for 3-ply 330#, and can wrap a 16” diameter head pulley. Provides a heavier top cover, higher strength, and greater durability. Very popular for primary and mobile crushers in the aggregate industry.
1-PLY 440# 1/4 x 1/8 GRADE 1 (RIPSTOP)
Single-ply straight warp belt carcass offers exceptional life, low stretch, and high volume carrying capacity. Thick, Grade 1 covers withstand high impact, tearing, and gouging.
3-PLY 600# 3/8 x 3/32 GRADE 1 (RIPSTOP)
High tension belt for handling heavy material, higher tonnages, and large lump sizes. Extra-thick Grade 1 cover. Withstands high impact as well as tearing and gouging from sharp/heavy material.
Request a Quote Today!
Please complete the form below