Range of Hoppers and more to support loading by hand, excavator, or skid steer.
A Standard Hopper is included with the conveyor purchased and is also available separately for purchase if necessary. This size is suitable for feeding by hand, wheelbarrow, or small excavator. It is designed to fit on the location points along the conveyor’s length and can be used in either direction. With just 4 pins, 2 persons can fit or remove it in seconds. Hoppers are dispatched flat packed for you to assemble.
Standard Support Stands are included with your conveyor, two long and two short. Not just for on-site support, but to strap the conveyor sections together for storage, handling with forklifts, and shipping to and from the site.
Two Standard Sizes (Long or Short)
SITE DETACHABLE TOWABLE WHEELS DOLLY
Site Detachable Towable Wheels Dolly and running gear is provided as an accessory for towing up to a 30FT LINKUP Conveyor around the site. The center wheel frame is bolted or pinned into position along the length of the conveyor. The hitching drawbar frame is positioned at either end and bolted/pinned into place. Supplied with a detachable towbar that’s mounted with a 2″ ball hitch.
Site Dolly to assist in manhandling up to a 30FT LINKUP Conveyor around the site. Running on puncture-proof wheels, this dolly can be mounted in any locating position along the conveyor and is best-situated with the center of gravity to the hopper end when loading with material.
The Isolator Box is designed to enhance your experience when working with GFI outlets or generators that have the same GFI configuration. This isolator box works in conjunction with the compact power control system, including an inverter, to prevent earth leakage restrictions. It enables the power supply needed to operate the 3-phase high torque and high power conveyor drum.
Product No. LP400-ISO