SAFEBELT & SAFETRAK ACCESSORIES

CONVEYOR STANDS FOR SAFEBELT & SAFETRAK

Adjustable Conveyor Stands available in three adjustable height settings from 20″ – 55″ (500mm – 1400mm). Stand heights are from the foot to the top of the belt.

These support stands are bright zinc-plated for extra durability. The telescopic legs and sturdy flanged foot give the option to either bolt to the floor if required, or fix to castors.

STANDARD STAND HEIGHTS

Stand 1: 20″ – 27″ (500mm – 675mm)

Stand 2: 27″ – 38″ (675mm – 975mm)

Stand3: 38″ – 55″ (975mm – 1400mm)

SAFEBELT Conveyor Stands
SAFEBELT Conveyor Stands 2
SAFEBELT Conveyor Stands 3

SUPPORT FEET

These can be used at the tail end of the conveyor when conveying on an incline or when the conveyor needs to run close to the ground. Sold in pairs.

RIGID CASTORS

4″-diameter (100mm) straight rolling non-lockable castors. Will raise the height of the conveyor by 5″ (130mm). Supplied with fixings to bolt directly onto the bottom of the support stands.

LOCKABLE SWIVEL CASTORS

4″-diameter (100mm) swivel wheeled lockable castors. Will raise the height of the conveyor by 5″ (130mm). Supplied with fixings to bolt directly onto the bottom of the support stands.

SIDE GUIDES FOR SAFEBELT & SAFETRAK

Detachable Side Guides 2.5″-high (60mm) in 2′ (600mm) and 4′ (1200mm) lengths to ensure the product doesn’t hang or fall over the conveyor frame.

These 2.5″-high (60mm) side guides are formed in mild steel with a zinc-plated finish. Supplied in 2′ (0.6m) and 4′ (1.2m) lenghts with fixings to simply bolt to the sides of the conveyors.

TWO SIZED FIT ALL

Short Side Guide: 24″ (600mm)

Long Side Guide: 48″ (1200mm)

Related Products

Have a Question? Contact Us About this Product

50 Washington Street | Norwalk, CT 06854

(866) 923-6579